SPINDLE BEARING LUBRICANTS
Spindle Bearing Lubricants: Hetman® Synthetic Bearing Lubricants are designed to protect rotary valve spindle bearings, the most critical wear points of the rotary valve. Spindle bearings require lubricants that allow the rotor to move quickly while simultaneously combating the tremendous stresses these components are subjected to. Hetman® Synthetic Bearing Lubricants are engineered to ensure maximum wear protection without slowing the action. These bearing lubricants protect against corrosion and will not damage plastic components or swell rubber bumpers. 22 ml precision needle oiler. Available in two nontoxic, non-gumming viscosity grades:
13. LIGHT BEARING - Designed for close tolerance spindle bearings. PN: H13-LB-22.
14. BEARING & LINKAGE - Formulated for instruments with spindle bearings of average clearance. This lubricant is also an excellent choice for spherical rod end bearings (e.g. "Minibal" and "Unibal" linkage joints) and other linkage components (see linkage application below). PN: H14-BL-22.
LINKAGE and BALL JOINT LUBRICANTS
Linkage and Ball Joint Lubricants: Hetman® Synthetic Linkage and Ball Joint Lubricants are formulated for superior performance and protection of rotary valve linkage components: spherical rod end bearings (e.g. "Minibal" and "Unibal"), linkage joints, cross joints, lever hinges and ball joints. These lubricants combat wear; provide for positive, quiet actions; and prevent corrosion of linkage components. These formulations are nontoxic, and non-damaging to plastic components and rubber bumpers. Packaged in 22 ml precision needle oilers.
14. BEARING & LINKAGE - For spherical rod end bearings (e.g. "Minibal" and "Unibal"), linkage joints, cross joints and lever hinges. Also recommended for rotary valve spindle bearings (see spindle bearing application above). PN: H14-BL-22.
15. BALL JOINT - A heavy viscosity lubricant designed specifically for ball joints. This synthetic quiets noisy joints and assures a smooth action by functioning as both a lubricant and a vibration dampening agent. Although formulated for ball joints typically exhibiting looser tolerances, this lubricant has found wide use on pivot screws, worn linkage components, screw bell threads, valve stem threads, and valve cap threads. Will not harm plastic joints. PN: H15-BJ-22.